Image unavailable Caterpillar MPD Display 259-2171 For Cat C7 marine engine
Part No. 259-2171 | 2592171 | 259 2171 Brand: Caterpillar
2-7 days
Alfa Marine Spare Parts is an independent supplier and is not an authorized Caterpillar dealer. Caterpillar names and part numbers are used for identification purposes only.
Product image not available
Request a quote for this part.
Caterpillar Marine Parts
52mm Outer Diameter Tapered Roller Bearing Cup
Availability: 2-7 days
Shipping: Worldwide
52mm Outer Diameter Tapered Roller Bearing Cup-9W-2110-Cat
Product Details
Part Number
9W-2110
Description
52mm Outer Diameter Tapered Roller Bearing Cup-9W-2110-Cat
Brand
Caterpillar
Category
DISPLAY MONITORS
Availability
2-7 days
Shipping
Worldwide
Price
On Request
Product Description
Caterpillar Bearing or bushing 9W-2110
1. Product Overview
Caterpillar Bearing or bushing 9W-2110 is listed under source title “52mm Outer Diameter Tapered Roller Bearing Cup”. It is classified for this pilot as bearing or bushing within the rotating-component support system. The source record does not establish an exact engine model. Confirm the complete engine model, serial number, arrangement, and installed reference before ordering.
2. Function and Operating Principle
A bearing or bushing supports a shaft, journal, gear, connecting rod, or other moving component while controlling alignment and friction. Geometry, clearance, load direction, lubrication, and material are specific to the installed position.
The bearing surface carries load across a controlled contact area and maintains a lubricating film or rolling contact. Correct oil supply, housing fit, shaft condition, and installed clearance are essential.
3. Application Status
| Manufacturer / brand | Caterpillar |
|---|---|
| Part number | 9W-2110 |
| Component category | Bearing or bushing |
| System | Rotating-component support |
| Evidence level | C — Component identity only |
| Engine application | Not established by the supplied record |
4. Typical Signs That Inspection May Be Required
| Observation | Possible significance |
|---|---|
| Knock, rumble, or abnormal rotational noise | May indicate clearance, lubrication, alignment, or surface damage. |
| Metal particles in lubricant | Requires prompt investigation of bearings and other wear components. |
| Low oil pressure or elevated temperature | Can involve bearing clearance, pump condition, restriction, or oil quality. |
| Scoring, wiping, pitting, or discoloration | Shows distress that requires root-cause analysis. |
These observations are inspection triggers rather than a confirmed diagnosis. Evaluate the complete engine system and follow the applicable manufacturer service information.
5. Inspection and Replacement Guidance
- Identify the exact bearing position and load class.
- Inspect the shaft or journal, housing, oil passages, and adjacent thrust surfaces.
- Measure using the manufacturer’s procedure and limits.
- Confirm size grade, oversize or undersize status, and engine arrangement.
6. Information Required Before Ordering
- Complete engine or equipment model.
- Engine serial number and arrangement or configuration number.
- Installed part reference and clear photographs of the identification label.
- Installation position and related assembly information.
Compatibility notice: Verify 9W-2110 against serial-number-specific parts documentation before purchase or installation. Do not select the component by appearance or part-number similarity alone.