Image unavailable Alfa Marine Spare Parts is an independent supplier and is not an authorized DEUTZ dealer. DEUTZ names and part numbers are used for identification purposes only.
Product image not available
Request a quote for this part.
DEUTZ Marine Parts
SET PISTON RING F2/3/4/6/L912
Availability: 2-7 days
Shipping: Worldwide
Price
On Request
Quote reference: Part No. 0223 3074
Need help identifying this part?SET, PISTON RING F2/3/4/6/L912 #4
Product Details
Part Number
0223 3074
Description
SET, PISTON RING F2/3/4/6/L912 #4
Brand
DEUTZ
Category
PISTON WEAR RINGS
Availability
2-7 days
Shipping
Worldwide
Price
On Request
Product Description
DEUTZ Piston component 0223 3074
1. Product Overview
DEUTZ Piston component 0223 3074 is listed under source title “SET PISTON RING F2/3/4/6/L912”. It is classified for Batch 5 as piston component within the combustion and power conversion system. The source record does not establish an exact engine model. Confirm the complete engine model, serial number, arrangement, and installed reference before ordering.
2. Function and Operating Principle
A piston receives combustion pressure and transfers force through the piston pin and connecting rod to the crankshaft. Its crown, ring grooves, skirt, cooling features, and weight must match the engine's combustion and cylinder design.
The piston reciprocates inside the cylinder while the ring pack seals combustion gas, controls oil, and transfers heat. Clearances and component matching change with engine model, bore, piston version, and overhaul specification.
3. Application Status
| Manufacturer / brand | DEUTZ |
|---|---|
| Part number | 0223 3074 |
| Component category | Piston component |
| System | Combustion and power conversion |
| Evidence level | C — Component identity only |
| Engine application | Not established by the supplied record |
4. Typical Signs That Inspection May Be Required
| Observation | Possible significance |
|---|---|
| Scuffing, scoring, or skirt wear | May involve lubrication, cooling, clearance, contamination, or overheating. |
| Broken ring lands or crown damage | Requires investigation of combustion, injection, cooling, and foreign material. |
| High blow-by or oil consumption | Can involve rings, liner condition, piston damage, or ventilation faults. |
| Cylinder knock or imbalance | Requires measurement and diagnosis of the complete cylinder assembly. |
These observations are inspection triggers rather than a confirmed diagnosis. Evaluate the complete engine system and follow the applicable manufacturer service information.
5. Inspection and Replacement Guidance
- Inspect the crown, grooves, skirt, pin bore, rings, liner, and cooling passages.
- Measure clearances and protrusion only by the engine manual.
- Match piston version, weight group, bore, rings, pin, and liner.
- Confirm engine serial number and overhaul configuration.
6. Information Required Before Ordering
- Complete engine or equipment model.
- Engine serial number and arrangement or configuration number.
- Installed part reference and clear photographs of the identification label.
- Installation position and related assembly information.
Compatibility notice: Verify 0223 3074 against serial-number-specific parts documentation before purchase or installation. Do not select the component by appearance or part-number similarity alone.