Image unavailable Alfa Marine Spare Parts is an independent supplier and is not an authorized CUMMINS dealer. CUMMINS names and part numbers are used for identification purposes only.
Product image not available
Request a quote for this part.
CUMMINS Marine Parts
TUBE-IDLE FEED
Availability: 2-7 days
Shipping: Worldwide
Price
On Request
Quote reference: Part No. 0149-2385
Need help identifying this part?TUBE-IDLE FEED #3
Product Details
Part Number
0149-2385
Description
TUBE-IDLE FEED #3
Brand
CUMMINS
Category
Others
Availability
2-7 days
Shipping
Worldwide
Price
On Request
Product Description
CUMMINS Hose, tube, or pipe 0149-2385
1. Product Overview
CUMMINS Hose, tube, or pipe 0149-2385 is listed under source title “TUBE-IDLE FEED”. It is classified for Batch 5 as hose, tube, or pipe within the engine fluid, air, or gas routing system. The source record does not establish an exact engine model. Confirm the complete engine model, serial number, arrangement, and installed reference before ordering.
2. Function and Operating Principle
A hose, tube, or pipe routes fluid, air, or gas between engine components. Diameter, length, bends, end fittings, pressure capability, temperature capability, and material must suit the exact circuit.
The line maintains a contained flow path while accommodating the installation geometry. Flexible lines may also isolate vibration and movement; rigid lines depend on correct alignment and support.
3. Application Status
| Manufacturer / brand | CUMMINS |
|---|---|
| Part number | 0149-2385 |
| Component category | Hose, tube, or pipe |
| System | Engine fluid, air, or gas routing |
| Evidence level | C — Component identity only |
| Engine application | Not established by the supplied record |
4. Typical Signs That Inspection May Be Required
| Observation | Possible significance |
|---|---|
| External leakage, staining, or wetness | May indicate cracking, loose connections, seal failure, or abrasion. |
| Kinks, collapse, or internal restriction | Can reduce flow and alter pressure or temperature. |
| Chafing or vibration damage | Shows inadequate clearance, support, or clamp condition. |
| Swelling, hardening, or heat damage | May indicate material deterioration or excessive exposure. |
These observations are inspection triggers rather than a confirmed diagnosis. Evaluate the complete engine system and follow the applicable manufacturer service information.
5. Inspection and Replacement Guidance
- Identify the media and circuit before selecting a line.
- Inspect fittings, clamps, supports, heat shields, and adjacent components.
- Do not force a rigid line into alignment or reuse damaged sealing interfaces.
- Confirm dimensions, fitting orientation, and arrangement-specific routing.
6. Information Required Before Ordering
- Complete engine or equipment model.
- Engine serial number and arrangement or configuration number.
- Installed part reference and clear photographs of the identification label.
- Installation position and related assembly information.
Compatibility notice: Verify 0149-2385 against serial-number-specific parts documentation before purchase or installation. Do not select the component by appearance or part-number similarity alone.